Company Overview

ConnectIT-1997

Company Information

Additional Details

Legal Name: Western Lakota Energy Services Inc

Number of Employees: 8

Total Sales ($CDN): $100,000 - $200,000

Contacts

Products

• 12 X 12 I/O Board

  This board was designed as an all purpose I/O board to handle a variety of discrete inputs and outputs. All the inputs and outputs are optically isolated and have LED indicators. The board will accept inputs from 12 VDC to 36 VDC and from 12 VAC to 120 VAC. the outputs may vary from 12 VAC to 120 VAC and 12 VDC to 120 VDC.

  Main Features:

  • 12 Optically isolated inputs
  • 12 optically isolated outputs fused at 1 Amp
  • Zero Cross over switching on AC Outputs
  • Optional MOV suppression on all outputs
  • DTMF Key pad interface
  • 1 Optically isolated low current DC Output
  • Optional High Speed Inputs
  • Optional Magnetic Pickup Input for RPM Monitoring (replaced

  DTMF Interface)

  • Optional 120 VAC Power Supply
• 24 X 48 I/O Board

  This board was designed as an all purpose I/O board to handle a variety of discrete inputs and outputs. All the inputs and outputs are optically isolated and have LED indicators. Both the inputs and outputs can be either AC or DC. The board will accept inputs from 12 VDC to 48 VDC and from 24 VAC to 120 VAC. The outputs may vary from 24 VAC to 120 VAC and 5 VDC to 48 VDC.

  Main Features: - Outputs

  • 12 - 1 amp fused outputs with feedback inputs
  • 18 - 1 amp fused outputs
  • 12 - 5 amp fused outputs
  • 6 - 3 amp fused Relay outputs with NO/NC contacts
  • Override switches on all outputs
  • LED indicators on all outputs
  • Each Output individually fused
  • 24 optically isolated inputs, AC or DC
  • LED indicators on all inputs - DTMF Key pad interface
  • Noise Reduction Circuitry on all outputs.
• Carwash Entry And Control Systems
• Code & Voice Entry System

  The EXACTA Audio-Visual Interface is an innovative design to meet the needs created by the Operator Free Car Wash. It has both audio (voice) and visual (LCD screen) prompts to help the customer at the entrance to the car wash.

  The Voice System is designed to give 10 voice messages that repeat keypad numbers when pressed, and up to 25 site programmable messages. This can be used very effectively to promote the wash, the site, and the company; as well as advertise any specials occurring at the time. A maximum message length of 2 minutes is possible with this system. The LCD screen is an enlarged character 2 line by 20 character display that is backlit for night time viewing.

  This Entry Stand is designed to integrate with the rest of the EXACTA system. This enables control of dedicated outputs and inputs for lamps, coin mechanism, and upsellbuttons, etc. Additionally, 4 outputs and 3 inputs are free for general purposes such as extra lights, bill validator, etc.

  Other features:

  • 9 Wire EXACTA port which enables accounting of sales through

  the EXACTA computer;

  • DTMF 12 button keypad;
  • Intercom for communication with kiosk;
  • Microphone for on site programming of voice commands
  • RS232 port reserved for future use
  • Optional Aluminum Stand
  • Optional Visual Only System
• Four Bay I/0 Board With Power Supply

  This board was designed as an interface for the modern Coin-Op Wand Bay Car Wash and has the ability to control four separate wand bays. All the inputs and outputs are optically isolated and have LED indicators. Inputs are provided for the DTMF Keypad and Coin Acceptors. Outputs are provided for Wash Control. The board will accept inputs from 12 VDC to 36 VDC and from 12 VAC to 120 VDC. The outputs may very from 12 VAC to 120 VAC and 12 VAC to 120 VAC.

  Main Features:

  • Optically isolated inputs
  • Optically isolated outputs fused at 1 or 3 Amp
  • Zero Cross Over switching on AC Outputs
  • Optional MOVs on all outputs - Four DTMF Key Pad interfaces
  • Outputs for Wand Bay LED control
  • Optional High Speed Inputs
  • Computer accounts for Coin Inputs and Bay Time
  • Up to ten Bays may be controlled from a single computer
• Series Iv/Viii Car Wash Point Of Sale Entry & Control System
• Series Xi Panel Mount Computer

  This Computer is panel mounted and can be used as a stand alone unit or as a 'slave' to a master unit. It can handle both Analog and Discrete inputs and outputs. The Series XI is easy to understand and interact with due to the object oriented style of programming incorporated into our Exacta line of Computers. The Computer displays information on a 40 character by 8 line display or over a R' 23 2 Port to a PC or Scada System. The unit comes standard with a 21 Button Programmable Keyboard complete with indicator lights. Each button can be programmed to perform a different function giving the unit a great amount of flexibility to handle any type of application.

  Some of the features available on the Series XI are as follows:

  • Built in Gas Compressor Programming
  • Customized programming for individual requirements
  • Customized diagnostic messages
  • Up to 192 Analog and Discrete Inputs
  • Up to 192 Analog or Discrete Outputs
  • I. S. (Intrinsically Safe) Analog Inputs (RTDs, T/Cs, 4-20ma,

  Voltage, Resistive)

  • I. S. Analog Outputs (4-20ma)
  • I. S. and X. P. (Explosion Proof) Discrete Inputs
  • X. P. Discrete Outputs (Relay, Triac or Transistor)
  • Built In P. I. D. and Time Proportional Control
  • Shutdowns and Alarms for Discrete, Analog and Differential

  (Comparing 2 Analog)

  • Rated for Class 1, Div 2 (soon to be Class 1, Div 1)
  • Two RS232 Ports and One Parallel Port
  • Optional 2400 Baud Internal Modem
  • Statistical information over the modem
  • On line programming over the modem
  • Ability to handle high speed pulse inputs (e. g.. RPM

  Monitoring)

  The Series XI Computer contains all the programming and flexibility of a P. L. C. (Programmable Logic Controller) and the ease and simplicity of a dedicated controller. Our Object Oriented programming language and State Engine allows us to program very complex processes. Our Parameter Setting capabilities allow us to quickly and easily program Gas Compressor shutdowns, alarms, pre-lube times, post-lube times, crank times, etc.

• Software For Car Washes
• Software For Industrial Process Control

  ConnectIT Category Description: Production Industrial Controls

• Sspc Entry System

  The EXACTA SSPC Entry System complete with Garbage Disposal is one of the fastest additions to the EXACTA family of entry stands. It is an innovative design to meet the needs created by the Operator Free Car Wash. It has both audio (voice) and visual (LCD screen) prompts to help the customer at the entrance to the car wash.

  The Voice System is designed to give 10 voice messages that repeat keypad numbers when pressed, and up to 25 site programmable messages. This can be used very effectively to promote the wash, the site, and the company; as well as advertise any specials occurring at the time. A maximum message length of 2 minutes is possible with this system. The LCD screen is an enlarged character 2 line by 20 character display that is backlit for night time viewing.

  This Entry Stand is designed to integrate with the rest of the EXACTA system. This enables control of dedicated outputs and inputs for lamps, coin mechanism, and upsellbuttons, etc. Additionally, 4 outputs and 3 inputs are free for general purposes such as extra lights, bill validator, etc.

  Main Features:

  • Speaker for Voice Output
  • Built in Intercom for communication with kiosk
  • Microphone for site programming of voice messaging
  • Built in trash can for garbage disposal
  • Full stainless steel construction
  • High Intensity Warning LEDs for: Place car in neutral, do not

  steer or brake' turn off engine.

  • Built in heater for all-weather use
• Standard Rollover Interface System

  The EXACTA Standard Rollover Interface is an innovative design to meet the needs created by the Self Serve Car Wash It has Enter Code, Enter Wash, Please Wait, and Wrong Code LED's to prompt or help the customer at the entrance to the car wash. A standard voice intercom is provided to enable communication with kiosk personnel.

  Main features:

  • Keypad buzzer for keypress feedback;
  • Security code required for wash access;
  • DTMF 12 button keypad;
  • Intercom for communication with the attendant in the kiosk;
  • Durable Powder Coated Outer Shell
  • High Intensity LED Indicators
  • Keyed Access
  • Optional Aluminum Stand
• Wand Bay Keypad Interface

  This interface was designed for Wand Type Coin-Op Car Washes. Customers purchase a wash ticket from the kiosk based on the amount of time that they require to wash their car. Each ticket has an individualized security access code. When the customer enters this code on the keypad in the wash bay, LED feedback indicates that the code has been accepted or is incorrect. If the code is valid, the 'In Use' LED indicates that the wash power is turned on and that the customer may begin their wash. The 'In Use' LED begins blinking near the end of the cycle so that the customer knows that the time is about up.

  Main features:

  • Water/Detergent Resistant
  • Buzzer feedback indicates key press
  • High Intensity Wrong Code/In Use/Code Accepted LED's
  • High reliability type membrane keypad
  • DTMF type keypad encoding
  • Sealed Aluminum enclosure
  • Optional rotary switch

NAICS Categories

• 334110 Computer and Peripheral Equipment Manufacturing

Additional Information