Company Overview

No company description is available yet for Spirol Industries Limited.

Company Information

Additional Details

Legal Name: Spirol Industries Limited

Number of Employees: 20

Contacts

Products

• Coiled Spring Pins

  Easily recognized by its unique 2-1/4 coil cross-section, it is the only spring pin with uniform strength and flexibility after insertion. The direction of the applied load is immaterial. Driven into the hole, it becomes a shock absorber. Available in three duties to provide a variety of combinations of strength, flexibility and diameter to suit different holes and materials.

• Compression Limiters For Plastic

  Compression limiters are designed to protect the plastic components of an assembly from the compressive loads generated by tightening of the bolts. The compression limiters come in both metric and imperial sizes.

• Dowel Bushings/Alignment Dowels/Tension Sleeves

  Roll-formed and heat-treated, bushings and dowels are designed for precision alignment. The bushings provide an inside diameter clearance allowing passage of a bolt for fastening. Tension sleeves, made from low carbon steel, provide a wear resistance surface in plastic or other soft material. Both the chamfered ends and the staggered seam allow for problem free installation.

• Precision Shims And Stampings

  These custom-engineered components are produced to your exact requirements. Proprietary SWAT (Stamping Without A Tool) technology eliminated tooling costs. Complete in-house secondary operations permit total control over quality, delivery and cost. The shim product line also includes laminated and edge-bonded shims, laminated shim stock, and a standard line of pump shims, lock washers, bearing cup shims and locking plates.

• Slotted Spring Pins (components)
• Spacers

  Manufactured by the most economical production method, roll forming from strip, the spacers are featured with butted seams and square burr-free ends. All are available in standard sizes and materials, reducing the purchase cost.

• Tubular Rivets And Connectors

  The most economical method of manufacturing rivets, roll forming from strip, reduces costs and permits lower prices. These rivets have straighter shanks than conventional rivets for faster, easier assembly. Connectors are rolled from strip steel and heat-treated for flexibility and strength. The inside diameter is controlled to allow for a press fit on mating parts. The ends are flared and a center stop is provided on the inside.

NAICS Categories

• 332720 Turned Product and Screw, Nut and Bolt Manufacturing

Additional Information