KELK
North York, ON
Company Overview
George Kelk Corporation (KELK) designs and manufactures state-of-the-art electronic measurement equipment used mainly in steel and aluminum rolling mills around the world, and also in paper mills and mining applications.
KELK is a Canadian company founded in 1953.
The Company operates from a modern plant located in Toronto, Canada. This facility houses the Head Office, Engineering, Manufacturing, Research, Sales and Service functions for the Company. The Sales and Marketing sections are supported by a worldwide network of agents.
In 1992, KELK received the Canada Award for Business Excellence in Innovation, honoring the Company's commitment to quality of design and manufacture. KELK is ISO 9002 registered.
Company Information
Physical Address
48 Lesmill Rd.
North York, ON M3B 2T5
CA
Mailing Address
48 Lesmill Rd.
North York, ON M3B 2T5
CA
Additional Details
Legal Name: George Kelk Corporation
Number of Employees: 150
CA
KELK offers a wide range of standard and custom-engineered sensors for the most demanding industrial measurement applications, such as:
Roll Force Measurement Laser Velocimetry Fluid Pressure Measurement Width Measurement Tension Measurement Crop Optimization Displacement and Position Measurement Plate Outline Measurement Weighing and Other Load Cell Applications
Contacts
John Shen
Title: Manager
Area of Responsibility: Export Sales & Marketing
Phone: Show phone
Fax: Show fax
Email: Show email
John S. Mitchell
Title: Manager
Area of Responsibility: Export Sales & Marketing
Phone: Show phone
Fax: Show fax
Email: Show email
Al Boluarte
Title: Manager
Area of Responsibility: Export Sales & Marketing
Phone: Show phone
Fax: Show fax
Email: Show email
George Oprea P. Eng.
Title: Manager
Area of Responsibility: Export Sales & Marketing
Phone: Show phone
Fax: Show fax
Email: Show email
Michael Liu M. Sc.
Title: Manager
Area of Responsibility: Export Sales & Marketing
Phone: Show phone
Fax: Show fax
Email: Show email
Roger Jones Mba.
Title: Vice President
Area of Responsibility: Research/Development/Engineering
Phone: Show phone
Fax: Show fax
Email: Show email
Larry Charbonneau
Title: Manager
Area of Responsibility: Domestic Sales & Marketing
Phone: Show phone
Fax: Show fax
Email: Show email
Tony Pinchev
Title: Manager
Area of Responsibility: Export Sales & Marketing
Phone: Show phone
Fax: Show fax
Email: Show email
Robert (rob) L. Ricciatti P. Eng.
Title: Vice President
Area of Responsibility: Domestic Sales & Marketing
Phone: Show phone
Fax: Show fax
Email: Show email
Peter G. Kelk
Title: President
Area of Responsibility: Management Executive
Phone: Show phone
Fax: Show fax
Email: Show email
Products
- Optical Apparatus/Instruments Nes
- Physical Properties Test/Insp Equip Nes
- Process & Multi-function Control Mach/App Nes
- Regulators, Voltage, Power < 500 Kva
-
Rollmax Load Cells For Industrial Roll Force Measurement
ROLLMAX Load Cells for industrial roll force measurement are engineered to meet the specific requirements of each individual application, including the direct replacement of existing load cells. All ROLLMAX load cells are warranted not only against defects in workmanship or material, but against failure of any kind, however caused, for a period of FIVE YEARS.
ROLLMAX WASHER LOAD CELL
- Preferred location is between the nut and the housing. Can also
be applied to under the screw.
- Particularly applicable to roughing mills or plate mills with
high impact loading and severe duty. As well as in rolling mills, KELK Washer Load Cells can be used in continuos casting machines, ladle cars, roller levelers, and other load measuring applications in demanding environments.
- Highly accurate
- Excellent linearity
- Low hysteresis
- High capacity range
- Fast response time
- High accuracy of calibration, traceable to the National
Institute of Standards and Technology (Formerly the National Bureau of Standards).
- Easily end economically retrofitted to existing mills. Low
maintenance requirements.
ROLLMAX DISC LOAD CELL
- Preferred location is between the screw and top back-up chock
in mills with roller bearings or solid bearings. As well as in rolling mills, they can be used in other types of machinery to measure force or load.
- Relatively insensitive to uneven loading that is always present
in this position.
- Excellent linearity
- Low hysteresis
- High capacity range
- Fast response time
- High accuracy of calibration, traceable to the National
Institute of Standards and Technology (Formerly the National Bureau of Standards).
- Can economically upgrade existing disc-shaped load cell
installations.
ROLLMAX SLAB LOAD CELL
- Preferred location is under the bottom back-up chock of the
mill in order to measure the force evenly spread over the rectangular area. As well as in rolling mills, they can be used in other types of machinery to measure force or load.
- Length matching that of rocker block ensures optimum load
distribution.
- Used to measure a load distributed over area of load cell in
cases where it is not possible to locate a cell closer to the rocker block.
- Relatively insensitive to uneven loading that is always present
in this position.
- Excellent linearity
- Low hysteresis
- High capacity range
- Fast response time
- High accuracy of calibration, traceable to the National
Institute of Standards and Technology (Formerly the National Bureau of Standards).
- Can economically upgrade existing disc-shaped load cell
installations.
ROLLMAX T-BLOCK LOAD CELL
- Special narrow design fits beneath rocker block at bottom of
the mill. As well as in rolling mills, they can be used in other types of machinery to measure force or load.
- Narrow cross section provides excellent integration of line
load from rocker block, with no need for load distribution plates.
- Impervious to mill fluids and scale.
- Will tolerate bending of mill housing and rocker block without
error.
- Excellent linearity
- Low hysteresis
- High capacity range
- Fast response time
- High accuracy of calibration, traceable to the National
Institute of Standards and Technology (Formerly the National Bureau of Standards).
- Scientific Instruments And Apparatus Nes
-
Sensors For Rolling Mills
Roll Force Measurement Laser Velocimetry Fluid Pressure Measurement Width Measurement Tension Measurement Crop Optimization Displacement and Position Measurement Plate Outline Measurement Weighing and Other Load Cell Applications
NAICS Categories
Additional Information
334512
ISO 9002
Albania, Algeria, Argentina, Australia, Austria, Belgium, Brazil, Bulgaria, Chile, China, Colombia, Czech Republic, Denmark, Egypt, Finland, France, Germany, Greece, Hungary, Iceland, India, Indonesia, Ireland, Republic of (EIRE), Italy, Japan, Korea, South, Luxembourg, Malaysia, Mexico, Netherlands, New Zealand, Norway, Papua New Guinea, Peru, Philippines, Poland, Portugal, Romania, Russian Federation, Serbia and Montenegro, Singapore, South Africa, Spain, Sweden, Switzerland, Taiwan, Thailand, Turkey, Ukraine, United Kingdom, United States, Venezuela, Viet Nam, Alabama, Arizona, Arkansas, California, Colorado, Connecticut, Georgia, Illinois, Indiana, Iowa, Kentucky, Maryland, Michigan, Nevada, New York, North Carolina, Ohio, Oregon, Pennsylvania, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia
Dominican Republic, Ecuador, Guatemala, Paraguay, Trinidad and Tobago, Uruguay, Florida