Royco Apparatus Ltd.

Address: 54 Pennon Rd.
Kleinburg, ON L0J 1C0
CA

Mailling Address: P.O. Box 277
Kleinburg, ON L0J 1C0
CA

Phone: (905) 893-1972

Fax: (905) 893-7227

Map it: Click Here

Royco Apparatus Ltd.

Royco Apparatus ltd., incorporated in 1970. A small specialty
engineering and manufacturing firm, located in Kleinburg,
Ontario,
Canada. Royco is engaged in consulting, design, manufacturing
and modification of medical instruments and apparatus used in
clinical and scientific studies. Also, equipment for geriatric
use and
light industrial production.

Awards: J.H. Royce:
1) Queens Silver Jubilee Medal, for meritorious service in
Aviation
Medicine.
2) Institute of Aviation Medicine (R.C.A.F.)

Certification:
1) Certified member A.S.M.E.

Company Details

Year Established: 1970

Total Sales ($CDN): $1 - $100,000

Number of Employees: 10

Company Information

John (jack) Royce
Title: President
Area of Responsibility: Management Executive
Telephone: (905) 893-1972
Fax: (905) 893-7227

Products

Royco Lift

Royco Posture Table Pt 3000
The Royco PT 3000 posture table and console is a simple-to-operate system, designed for accurate patient positioning with minimum operator effort and patient discomfort. The table tilts, rolls and perfectly positions patient at closely controlled rated of speed in safety and comfort. Used for clinical studies in the field of vestibular physiology and related fields.

Royco Optokinetic Drum Opto 30
A vestibular test unit, designed to produce closely controlled Optokinetic nystagmus for clinical studies of the oculo-motor system. A variety of readily installed grid patterns and a reliable close tolerance solid state speed control also facilitates clinical research.

Royco Porta Ramp
A light weight, full width (30 inches) ramp, easily installed for interior or exterior use. The non-skid surface makes it ideal for walking, wheelchair or general use. May be permanently installed or portable and is a multi-purpose, reasonably priced aid to mobility. Available in 4 Ft., 8 Ft., and 10 Ft,. Lengths, with 500 lbs. load rating.

Royco Science Demonstration Apparatus
Royco Science Demonstration Apparatus. Simply designed for demonstration of basic physics. May be used where no modern conveniences are available i.e. running water etc. in remote areas. Demonstrating - Beam balance ; lift pump : thermal expansion of metals : distillation of water : production of colour spectrum from white light. Others available on request. Distillation Apparatus A demonstration still, designed as a self contained unit to be used where water facilities may not be available. An alcohol lamp supplies the heat to generate steam which is cooled by water, fed from a small tank mounted on the back of the stand. The gravity feed supplies water to the self priming condenser which discharges into a beaker. The only additional requirement is water to initially fill the tank, which is refilled from the beaker. The complete sequence of operations may be easily seen and understood. Size - 13 inches X 16 inches approx. Spectrograph This device is designed to hold the light source, prism and screen in the correct relationship to produce a spectrum for the illustration of the production of pure colour from white light. Using a standard 35 mm projector (not supplied) as a light source and a glass prism as the refractory mediums, this unit will produce a spectrum of 4 inches X 6 inches approx. A 3 inch prism and slit mask are stored in a covered mounting block. The unit may be stored in a drawer or cupboard, assembled in less than a minute and will provide front or rear projection viewing of the spectrum. Size - 8 inches X 23 inches for storage; 8 inches X 40 inches set up, approx. Scales Designed to demonstrate the principal of a beam balance, this unit comes complete with weights from 1/10 gm. to 10 grms, may be set up in less than a minute and has a sensitivity of 1/10 gr. The critical part - the knife edge - is a standard razor blade, which may be replaced quickly and easily when necessary. The operation of this unit is simple, foolproof and reliable and demonstrates clearly the basic principal of a balance. Size - 6 inches X 13 inches approx. Pump Designed as a completely self contained unit for demonstration of the principals of a simple lift pump. Construction of clear plastic and non-rusting metal, using valves of red and black material, this simple, rugged init provides a very clear visual demonstration. The operation of the valves and piston may be easily seen. When placed in a shallow pan of water and pumped, this unit will produce a large stream of water from the spout and may be quickly and easily emptied and stored for future use. Size - 6 inches X 10 inches high, approx. Expanxiometer A device for demonstration thermal expansion of the three base metals - steel, aluminum and copper. This device, simply and ruggedly constructed, consists of mounting cradles, in which the sample bars are placed and an adjusting screw used to zero the indicator. An alcohol lamp supplies the heat, causing a gross movement of the pointer across the graduated scale. The principal of thermal expansion and comparison between various metals is graphically displayed. Size - 9 inches X 9 inches approx.

Wine Carboy Lift
A hand winch operated - fully castered lift Designed to lift and transport a fully loaded wine carboy from floor level and place carboy on a shelf six feet above floor level. No manual lifting required

Sheet Metal Bending Brake
Stand mounted brake (stand removable) designed to bend 20g. (.035') cold rolled sheet to 90 + 45. Width capacity - five feet Total weight - 150 lb.

Services

Engineering & Design Engineering (mechanical/electromechanical) and design of custom equipment apparatus and instruments. Also medical instruments used in clinical and scientific research fields and science demonstration equipment for educational purpose.