Eagle Specialized Coatings
We provide high tech protective coatings for Waterproofing, Corrosion Control, Concrete, Thermal Control, Fireproofing and Anti-Graffiti
Company Details
Company Information
David Lawson
Title:
Consultant
Area of Responsibility:
Domestic Sales & Marketing
Telephone:
(604) 250-2966
Fax:
(604) 576-7773
Email:
Click Here
Products
Rust Grip
Super Therm
What is SUPER THERM? It is a combination of high-performance,
water-borne acrylic resins, which cures out completely in one
week to an extremely tough, durable, non-yellowing, water-
resistant coating that also provides flexibly and ultra-violet
stability. SUPER THERM offers toughness unmatched in the current
market coupled with the flexibility necessary to meet the
stresses of contraction and expansion without cracking or
breaking down. This single development enables the paint to
outlast all other paint products-20 years or more from a single
application (based on the use of recommending coating thickness
and proper application methods). Other paints will develop
hairline cracks when the surface moves, through which moisture
invades to develop blistering and finally peeling. SUPER THERM's
flexibility and durability is accomplished through four
different types of resins used in the foundation. Two acrylic
resins blended together specifically for the purpose to achieve
elasticity, adhesion, and provide a water resistance to ponding
water. A urethane is blended in to provide a moisture barrier
and bind all the resins together for added weatherability and UV-
resistance. Finally, a special additive is blended into the
resin mix to create a slower dry down to avoid any surface
cracking due to our load of ceramic compounds, and to give a
silky finish that enhances and extends the life of the coating
in all climates due to its special polymers that guard against
burn out. SUPER THERM can also withstand exposure to -60 degrees
Fahrenheit without deterioration and, according to mil
thickness, up to 1600 degrees Fahrenheit. SUPER THERM is
designed with three separate ceramics-two reflectives with one
deflecting radiant heat and the other working to reduce
emissivity or reduce the heat build up on the surface of the
coating. The third ceramic particle acts as a microscopic dead
air space between the coating surface and the substrate to stop
heat and/or cold conduction through the coating film. In
testing, SUPER THERM outperformed one inch of styrofoam board,
four inches of polyurethane foam, and 6-8 inches of batt
insulation. This translates directly to dollars in your pocket.
SPECIFIC APPLICATIONS
There are no limits to the application possibilities for SUPER
THERM. It can be used on metal roofing structures such as mobile
homes, livestock barns, grain bins and oil tanks, refrigeration
units, and metal buildings to help reduce ambient temperatures
by as much as 25-40 degrees. This translates into reduced
heating/cooling needs, less loss of animal life due to
escalating ambient temperatures, greater protection for storage
contents, and greater life expectancy for the structure itself.
Exterior surfaces, likewise, enjoy greatly reduced temperatures,
from metal pipes in the industrial field to the concrete
surrounding the family swimming pool-anything that people come
in contact with. Additionally, as part of a roofing system,
there is no comparison for SUPER THERM's ability to withstand
basic weathering for 20-25 years minimum, resisting everything
from normal stress to hail stones to ponding water. Besides
normal insulation uses, SUPER THERM can survive exposure to the
inner workings of an acid incinerator to stop the heat and
dripping acids from corroding the steel walls. All this with a
U.S.D.A.-approved, environmentally safe formula that lends
itself to possibilities limited only by one's imagination.
February, 2002 -- We are proud to announce the official DNV
Certification of Supertherm for maritime usage.
Non-skid Flooring
NON-SKID is a tough, fast-curing, two-component polyurethane
enamel, which produces a uniquely hard and durable coating film.
It holds a unique ceramic particle that gives the surface a slip
resistance even when inclined and wet. NON-SKID will demonstrate
unsurpassed semi-gloss retention, color-retention, and chalk-
resistance, when utilized for exterior coating situations. NON-
SKID will provide outstanding resistance to water and humidity,
stains, chemicals, and solvents, as well as tremendous scuff-,
mar-, and impact-resistance. In summary, the overall toughness,
durability, and weather-resistance of NON-SKID polyurethane
enamels, make them the ideal choice for demanding product
applications for architectural/maintenance situations that
require the utmost in exterior durability. NON SKID is an
ambient/slow moisture-cure coating, and carries a 150-micron
size ceramic particle for traction. NON-SKID is a self-leveling
formula for an outstanding finish. The polyurethane enamels have
been in use for architectural structures and OEM since 1980.
Sp2001-f High Temperature Coating
SP2001F is a unique blend of eight different ceramic compounds
chosen out of over 6 years of research and 1000 compounds that
combine and work together to form a heat block against extreme
heat migration. Since the coating surface will come in direct
contact with flame, a char enhancer was added to form a small
char on the surface. When the char forms, it brings the ceramics
up and into the char to allow the char to be tough and remain in
place during actual fire conditions. This coating is a ceramic
hybrid that is unique to the industry. It is not fragile, it
becomes surface hard; and because of the ceramics, it will
continue to insulate against extreme heat migration during a
direct or indirect fire. Whatever surface is covered with this
coating is able to offer extreme heat insulation through any
substrate coated.
This is not an intumiscent coating, but instead, a pliable film
that reacts to flame. In comparison, intumiscent coatings swell
upon contact with fire and form a char that is extremely
lightweight and fragile, leaving them susceptible to damage
during a fire from strong winds, flying debris and sprinkler
systems. Once the char is brushed off, the existence of fire
protection is eliminated. Clean-up of all surface areas (direct
and indirect exposure) is extensive from the swelled coating.
Cementious materials are very expensive to apply and have poor
appearance. Some will emit toxic fumes during a fire.
Cellulose materials look like a shag rug on the surface and will
be affected over time by condensation and humidity.
Unlike most fire barriers requiring 2-3 inches thickness (50-
70mm), SP2001F requires only 8 to 10 mm (350-400 mils) over wood
and porous substrates, over metal 7 to 8 mm (300-350 mils)
thickness to provide fire protection. The competing fire
protection materials are either cementious and must be trowled
on over wire mesh - which is time-consuming in its application
and inflexible in its finished state, or blown-on cellulose -
which is somewhat fragile and subject to surface damage.
Intumiscent paints are applied thinly but when activated become
fragile after expanding out to meet the flame. In other
situations, two wallboard sections (5/8 inch thick-14mm each)
are nailed together to provide fire protection. This is labor-
intensive and impractical in most major construction areas.
SP2001F relies upon the dense combination of eight ceramic
compounds to catch the heat of the flame. When flames contact
the face of the coating, it begins a glazing or surface
hardening that becomes tough while sealing off any pores to
heat, smoke or gas passages. When the coating surface completely
hardens, it forms a solid block against heat conduction. The
SP2001F will set hard and hold constant for the duration of the
fire.
In summary SP2001F is an extremely versatile high-temperature
insulation and fire-protection coating that offers itself to
uses across all industrial, commercial and residential
boundaries. The fact that it is easy to apply, water-based, non-
toxic and remains flexible until used, makes this coating a
promising choice for those with high temperature, insulation and
fire-protection needs.
Enamo Grip
DESCRIPTION:
ENAMO GRIP is a tough, medium speed, moisture curing, two-
component polyurethane enamel, which produces a uniquely hard
and durable coating film. ENAMO GRIP will demonstrate
unsurpassed semi gloss retention, color-retention, and chalk-
resistance, when utilized for exterior coating situations. ENAMO
GRIP will provide outstanding resistance to water and humidity,
stains, chemicals, and solvents, as well as tremendous scuff-,
mar-, and impact-resistance. Ideal for use on bridges applied
over RUST GRIP or by itself for complete encapsulation of the
metal, providing protection from rust and corrosion for a
minimum of 20 years in normal circumstances. Resistant to hail
damage and similar abuses that create opportunities for rust and
corrosion.
Completely UV controlled and weather-resistant. ENAMO GRIP is a
self-leveling formula for an outstanding finish. ENAMO GRIP can
be used on flooring for a tough, long-wearing surface but
precise measures to insure a completely clean surface free from
moisture and residues must be adhered to. In summary, the
overall toughness, durability, and weather-resistance of ENAMO
GRIP polyurethane enamels, make them the ideal choice for
demanding product applications for architectural/ maintenance
situations that require the utmost in exterior durability. ENAMO
GRIP is an ambient/slow moisture-cure coating.
Graffiti Cleaner
DESCRIPTION:
This cleaner doesnt evaporate like acetone, resulting in lower
VOC emission levels. It is a powerful cleaner, as effective as
acetone, and safer to use because it is non-flammable. GRAFITTI
CLEANER is not a water-based emulsifier, but it is just as safe.
GRAFITTI CLEANER is a unique blend of gylcol esthers and n-
methylpyrrolidone. It is 100% water-soluble and totally
biodegradable.
Spray GRAFITTI CLEANER over grafitti. Wait 15 minutes and power
wash off; in some cases, hose off. Completely biodegradable and
not harmful to the environment.
NOTE: Use rubber gloves and eye wear when using to protect from
mist and pro longed contact with skin. If prolonged contact with
skin occurs, skin will wrinkle and dry. Use hand lotion over a 3-
5 day period while the top layer of skin peels off. After use,
wash with soap and water on exposed areas.
GRAFITTI CLEANER use to remove grafitti from ENAMO GRIP works
very effectively. Prior warning must be given if applying
GRAFITTI CLEANER over grafitti on top of other paints. The
cleaner may cut through the other paints and cause the base
paint to come off.
Epoxo Therm
DESCRIPTION:
Tough adherent, two-component Epoxy coatings, which produce
hard, yet flexible coating films. EPOXOTHERM will demonstrate
excellent chemical- and solvent resistance when utilized in
harsh atmospheres, and will also provide outstanding water- and
humidity resistance.
EPOXOTHERM will adhere tenaciously to a variety of substrates,
such as carbon steel (phosphated or non phosphated), wood, and
concrete. EPOXOTHERM is made with the same ceramic compounding
as SUPER THERM for insulation effectiveness equal to 4-6 inches
of batt insulation materials. EPOXOTHERM has ceramic compounds
in the formula to reflect sunlight, as well as to slow heat
conduction from radiant heat sources. The ceramic compounds also
help this epoxy formulation to withstand the UV effects of the
sun that will chalk all epoxy formulations
OF SPECIAL INTEREST:
Outstanding adhesion
Good solvent resistance - can be washed down
Excellent flexibility
Self-priming
Excellent impact-resistance
6-8 hour pot-life
Can be tinted any color desirable
Hot Pipe Coating
HOT PIPE COATING is a unique combination of high performance specialy designed high-temperature resins in a waterborne formula. This coating will dry slowly by evaporation and can be aided in the dry down by adding high heat to the environment. The product remains flexible when dried. HOT PIPE COATING was built to be used as the initial primer coating and high build coating applied over hot pipes or other high temperature surfaces to achieve immediate adhesion while calming down the hot surface. Using this coating as the primer and base coat, we can achieve adhesion over the hot surface and create a surface that is insulated to stop heat flow. It is waterborne to offer a nonflammable, non toxic formula for high heat situations.
Services
Specialized Protective Coatings
We offer high tech solutions for the following problem areas:
Thermal Controls - Non-deteriorating liquid ceramic insulation coatings - Our coatings retain their full
thermal properties over time,resists humidity and eliminates corrosion under insulation. DNV Certified, ENERGY STAR,LEED POINTS
Fire Proof - Flame retarding, fire rated coatings
Water Proof - Monolithic (seamless) protection
Control - Condensation, Mould, mildew, rot
Concrete - Non-Slip Surfaces, restoration, sealing
Corrosion - Permanent rust proofing - DNV Certified / Marine
Graffiti - Graffiti proof low maintenance coatings and biodegradable cleaner
Consulting And Contracting
Simply put we are problem solvers offering solutions. A
specialized coatings consultant is available to help the
customer to first identify problems and then develop a process
to select the best solution for each problem from a wide range
of protective coatings engineered to meet specific needs.
We have fully certified applicators and contactors to get the
job done on budget and on time. Our operations manager is
present throughout to ensure quality control.
Mold Remediation Services
testing of homes and buildings for toxic mold, humidity and
ventilation balances, air quality control