Colt Automation Limited

Address: 2770 Coventry Rd.
Oakville, ON L6H 6R1
CA

Mailling Address: 2770 Coventry Rd.
Oakville, ON L6H 6R1
CA

Phone: (905) 829-2230

Fax: (905) 829-3325

Email: Click Here

Map it: Click Here

Website: http://www.coltauto.com

Colt Automation Limited

Colt Automation Limited is a Canadian Company located in
Oakville, Ontario with 48,000 square feet of manufacturing space
devoted to the design and manufacture of Coil Handling and Press
Feeding Equipment servicing the Metal Stamping Industry. Since
1965, Colt Automation has consistently been providing top
quality mechanical presses and feeding equipment. As the
industry became more automated, Colt Automation responded by
concentrating on the design and assembly of coil processing
systems. Today Colt Automation is recognized as an innovator in
the design and development of equipment for the stamping industry

Colt's fully computerized design department utilizes state of
the art technology for the design of control systems that
maximize both output and quality of product.

The high standards of quality set by Colt Automation in the
manufacture of its equipment has made Colt one of the most
respected suppliers in metal stamping feeder lines. Colt
equipment performs consistently and efficiently, day after day
under the most gruelling manufacturing conditions.

Company Details

Year Established: 1964

Total Sales ($CDN): $1,000,000 - $5,000,000

Number of Employees: 40

Company Information

Rick Adams
Title: General Manager
Telephone: (905) 829-2230
Fax: (905) 829-3325
Email: Click Here

Frank Wright Jr.
Title: Manager
Telephone: (905) 829-2230
Fax: (905) 829-3325
Email: Click Here

Products

Bending/Straightening Mach, Metalworking Nes

Coiling/Uncoiling Mach, Metalworking, Nes

Metalworking Machinery, Nes

Hoist, Industrial, Nes, Parts Of

Feeder, Mechanical Type, Nes

Feeder, Rotary Type

Presses, M/W, Nes

Coil Cars
Coil Cars The Colt Heavy Duty Coil Car is designed for the purpose of loading new coils on to the Uncoilers thus keeping the down time in the Press Feeding Cycle to a minimum. These Coil Cars are self contained with their own hydraulic power pack and have the capability to accurately position the Coil on the Mandrel of the Uncoiler thus preventing possible damage to the Uncoiler Mandrel or to the material. The use of the Coil Car is recommended for situations where material handling equipment is not always available to load coils on to the Uncoiler therefore preventing excessive delays in re-loading the Uncoiler. The Coil Car is available for this purpose. The hydraulic power is used for raising and lowering the table and also provides forward and reverse travel motion.

Uncoilers Reels
The Light, Medium and Heavy Duty Reel Uncoilers are designed to handle coils up to a maximum of 70,000 lbs., a diameter to 84 in. O.D. and a width up to 84 in. Of rugged construction, long equipment life is ensured by the use of a variable speed A.C. frequency drive, the controlled acceleration and deceleration removes all shock and impact in the drive train normally associated with intermittent motion. Automatic loop control assures that material is fed from the coil at precisely the speed required to maintain a regular flow through the entire line. Forward/Reverse and jog controls permit accurate in-feed and rewind operations.

Colt Coil Handling Equipment
Colt Coil Handling equipment consists of Coil Cars, Uncoiler Reels,and Cradles, that have the capability of handling coils weighing up to 70,000lb., 84' wide and 84' diameter.

Press Feeding Equipment
The Press Feeding equipment includes Straighteners, and Roll Feed Units automated with the latest control devices for programming optimum service conditions that provide maximum production output. Combination machines (Systems) are available to suit requirements where space may be limited i.e Cradle/Straighteners/Feeders with servo drives that permit complete system control.

Power Straightener
Colt provides a range of Straightener including Medium and Heavy Duty Straighteners. Colt's Heavy Duty Straightener utilizes an adjustable roll bank in conjunction with entry & exit pinch rolls. The Pinch Rollers have Pneumatic lifters and are available with satin finish for greater surface traction. This unit also incorporates dial indicators for reading and setting of the upper bank of straightening coils

Services

Training Colt understands the importance of proper installation and proper training for users of Colt equipment. To ensure that Colt machinery is properly installed and performing to capacity, Colt provides a start-up service along with operator training to obtain the maximum efficiency and output from the equipment. Colt's professional on site training program covers not only operating procedures but also detailed maintenance and safety procedures.